TROUBLESHOOTING
Observation
Possible Cause
Remedy
None of the
displays are
lighting up after
switching on
the rocker switch
Internal Error
Turn off the rocker
switch and inform
the supplier
Uncomfortable
stimulation
Lack of
conductive gel
Pause the stimula-
tion, Put more
conductive gel
and reposition the
probe electrodes
on the treatment
area. Then restart
treatment
Skin irritation at
probe electrode
placement site
Improper contact
Wet or change
the electrode
Sudden high
Intensity while
increasing
intensity level
Increasing too
fast
Increase slowly
giving time for
client to adjust
comfort level
Weak stimulation
or no stimulation
even at maximum
intensity setting
Probe electrode
conduction is low,
lead wire is worn
out or damaged
Change
electrodes.
Change
electrode wires
MAINTENANCE
Cleaning/Sanitizing
Soiled unit is sanitized with an antiseptic
Hands should be sanitized and dry during the operation.
Sanitize the probe and applicator by spraying with antiseptic
on a damp cloth and wipe well.
Warning
Do not pull out hand held applicators from the cables.
All wires and cables should be kept loosely winded or
breakage may occur.
Storage
To keep the device free of dust when not in use, covered the
device with a drape or towel.
Do not store the device in a damp environment such as in
proximity of a facial steamer or hot towel cabi. Dampness will
affect the device and may cause rust.
30
31
MyoLift MD Master Device | Operations Manual
MyoLift MD Master Device | Operations Manual
