CHANGE TIMER
The MyoLift MD Master Device operates with a default intensity
level and timer for each model. All modes have the treatment
time displayed along with the amount of time in minutes. Each
Mode has a “Total Treatment Time”. This Total Treatment Time is
made up of the total minutes of each sub-mode. At the
completion of each sub-mode treatment timing, the device is
programmed to sound a beep. Tap on the next displayed
highlighted sub-mode and its default timing is automatically
advanced for that sub-mode.
To customize the service, the treatment time can be changed
from the default timing with the assistance of the encoder during
or before the treatment. Only in the Custom Mode setting are the
8 sub-modes. Each sub-mode is in 10-minute defaults and the
ultimate range is 0-100 minutes. In the Custom Mode settings there
is no automatic advancement to the next sub-mode. The
Professional user is at liberty to select any mode and treatment
time range from 0-100 minutes. Its default treatment time is 10
minutes on GUI. The table below provides the range of time for
that treatment time from 0-30 minutes.
a. Circulation
b. Lymph Drainage
c. Light Lift
d. Deep Lift
e. Firming
f. Iontophoresis
2 min
10 min
16 min
9 min
10 min
3 min
0-30 min
0-30 min
0-30 min
0-30 min
0-30 min
0-30 min
S.No.
Modes
GUI display
Range
Face Lifting (Total time 50 min)
a. Circulation
b. Lymph Drainage
c. Iontophoresis
2 min
10 min
3 min
0-30 min
0-30 min
0-30 min
1
Rejuvenation (Total time 15 minutes)
2
a. Circulation
b. Lymph Drainage
c. Erase
d. Educate
e. Firming
2 min
10 min
5 min
15 min
5 min
0-30 min
0-30 min
0-30 min
0-30 min
0-30 min
Wrinkle Reduction (Total time 37 minutes)
3
MyoLift MD Master Device | Operations Manual
MyoLift MD Master Device | Operations Manual
34
35
