10
Device installation
ǽ
If the tamper-evident sticker is broken, the warranty your company provides
for the device is cancelled. Follow your company’s guidelines.
•
AC adapter (Mains requirements: AC 100-240 V, 50/60 Hz, 1.5 A Output: DC
7.5V, 3.0 A)
Use only the AC adapter provided and always plug it into a grounded
socket.
•
Mains cable
ǽ
The shipped mains cable has a CEE 7/16 (’Europlug’) plug that can be safely
plugged only into a grounded CEE 7/4 socket. If the socket is incompatible
with the power plug, use a plug converter or visit http://www.globtek.com/
datasheets/pdfsnew/GTM91120-XXYY-T2T3A.pdf for a GTM91120-3007.5-T2
AC power supply that suits your socket.
•
Two test strip trays with a clean white reference pad firmly in place
•
Grey check strip
•
Roll of printer paper
•
User Manual (short version)
3.3 Setup considerations
Do not use the device outdoors.
•
Set up and operate the device on a solid level surface in an environment with
fairly constant temperature and humidity.
•
Do not operate the device in close proximity to sources of intense electromag-
netic radiation (such as unshielded intentional RF sources).
ǽ
The device is certified to meet the EMC requirements of IEC 61326-1:2005
and IEC 61326-2-6:2005. See “Appendix F Safety and compliance informa-
tion” for further details. Do not operate the device in temperatures below 15°C
(59°F) or above 32°C (89.6°F). See “Appendix B Technical specifications” for
further environmental considerations.
ǽ
The device displays a warning message (“W37”) if the ambient temperature is
out of the operational range.
•
Do not expose the measuring head to intense light such as direct sunlight.
ǽ
The device displays an error message (“E269”) if an external light source in-
terferes with the strip reading process.
•
Do not set up and operate the device in an environment with vibration sources.
Make sure that the strips sit and travel smoothly and stay level in the test strip
tray at all times.
3.4 Clearance limits
Make sure that there is enough room in front of the device for the test
strip tray to move in and out freely. The DocUReader 2 Pro device can
