manualshive.com logo in svg

4xem IPVS1A, User Manual, Page: 9 / 103

Share
Download
4xem IPVS1A User Manual Download Page 9

 

 
 
 
 
 
 

 
 
 

 

 

 

 

4

 

 
 
 
 
 

 

Status LEDs 

 

 

Each time Video Server starts, it will perform a Power-On Self Test, abbreviated as POST 

hereafter, to examine every hardware module. As soon as the administrator plugs in the power 

adapter, both LEDs under the network LED will flash one by one until the POST is done. If any 

module fails, both LEDs will indicate to the users the error according to the pattern listed in 

Appendix A. If the result is good, both LEDs will turn off for a while and then follows the 

pattern below. Network interface depends on the peripherals including Ethernet UTP cable, 

modem or null modem cable. If the Ethernet cable between Video Server and Ethernet hub is 

good, Video Server will choose the Ethernet network. If Ethernet is unavailable but a operational 

modem is connected, the network interface will be PPP with modem. If either of the above is not 

the case, Video Server will try the interface of PPP with null modem. 

 

Network Interface 

Condition 

LED2 (Heartbeat)  LED3 (Status) 

before installed 

OFF 

OFF 

after installed 

flash 

OFF 

Ethernet 

during camera control 

flash 

Flash 

PPP with modem 

after POST 

flash 

ON 

before connected 

ON 

ON 

PPP with null modem 

 

after connected 

flash 

ON 

 

 

 

Summary of Contents for IPVS1A








































































































Reviews:

No comments