4xem IPVS1A User Manual Download Page 10

Page: 10 / 103

Restore button

There is a button hidden in the box for restoring the system factory default settings. When the

system fails to install or operates abnormally, use the included assistant stick in the package and

follow the following procedures to reset the system back to its original status.

Poke the assistant stick into the hole to press down on the restore button. Restart the system by

unplugging and re-plugging the power jack. While keeping the button pressed, the system will

perform POST twice rather than the usual once, which can be observed from the flashing LEDs.

After the system flashes the LEDs for the second time, withdraw the stick to release the button.

The system will have restored factory default settings at that moment.

Power adapter

Connect the power jack of the included power adapter. Connecting the power adapter should be

the last operation while physically installing Video Server.

Summary of Contents for IPVS1A








































































































Search results

Summary of Contents for IPVS1A

Reviews:

Related manuals for IPVS1A

Brands by name

Popular brands

4xem IPVS1A, User Manual

Search results

Summary of Contents for IPVS1A

Reviews:

Related manuals for IPVS1A

Brands by name

Popular brands