User manual EasyTop 2 kW audio system
4SeasonsSpa
®
12
3.
Spa operation
Fig 3.1
Display Fig. 3.1.
Icons meaning and light
Icon
Solid
Blinking
1
Pump 1 active at high speed
Pump 1 active at low speed
2
Pump 2 active at high speed
Display shows desired temperature
Heater active
Heater not active, but heat required (Low
Current connection).
Light on at high intensity
Light on at low intensity
Economy function active
Economy function in stand-by
Filter or Purge function active
Filter or Purge function in stand-by
3.1 Activating the control system/display
Check the following before operating the spa:
-
Ensure the spa is filled with water.
-
Ensure all valves are open.
-
Ensure the water flow through the pipes is not obstructed.
The temperature of the water used to fill the spa is, in general, lower than the standard set temperature of 36 °C.
The controller will therefore, as soon as it is switched on, activate the pump which will push the water through the
heating system and automatically activate it.
