4RF Aprisa SR+ User Manual Download Page 301

Page: 301 / 492

Managing the Radio | 301

Aprisa SR+ User Manual 1.11.1

Software > Remote Distribution

This page provides the mechanism to distribute software to all remote radios into the Aprisa SR+ network
(network) and then activate it.

The Software Pack that was loaded into the base station with the file transfer process

(see ‘

Software > File

Transfer

’ on page

293) can be distributed via the radio link to all remote radios.

This page is used to manage the distribution of that software pack to all remote radios on the network.

This page is only available when the radio is configured as a Base Station.

REMOTE SOFTWARE DISTRIBUTION

Software Pack Version

This parameter displays the software pack version available for distribution on base station and activate on
all stations.

Status

This parameter displays the status of the software pack version.

If a Software Pack is not available, the status will display

‘

Unavailable

’

and the software distribution

mechanism will not work.

Summary of Contents for Aprisa SR+













































































































































































































































































































































































































































































































Search results

Summary of Contents for Aprisa SR+

Reviews:

Related manuals for Aprisa SR+

Brands by name

Popular brands

4RF Aprisa SR+, User Manual

Search results

Summary of Contents for Aprisa SR+

Reviews:

Related manuals for Aprisa SR+

Brands by name

Popular brands