4RF Aprisa SR+ User Manual Download Page 298

Page: 298 / 492

298 | Managing the Radio

Aprisa SR+ User Manual 1.11.1

PREVIOUS SOFTWARE

Version

This parameter displays the software version that was running on the radio prior to the current software
being activated.

Status

This parameter displays the status of the software version that was running on the radio prior to the current
software being activated.

Option

Function

Active

The software is operating the radio.

Inactive

The software is not operating the radio but could be re-activated if
required.

Activate

This parameter activates the previous software version (restores to previous version).

The Aprisa SR+ will automatically reboot after activation.

SOFTWARE PACK

Version

This parameter displays the software pack version available for distribution on base station and activate on
all stations.

Status

This parameter displays the status of the software pack version.

Option

Function

Available

On the base station, the software pack is available for distribution.
On all stations, the software pack is available for activation.

Activating

The software pack is activating in the radio.

Unavailable

There is no software pack loaded into the radio.

Activate

This parameter activates the software pack.

The Aprisa SR+ will automatically reboot after activation.

Activation Type

This parameter sets when the software pack activation will occur.

Option

Function

Now

Activates the software pack now.

Date & Time

Activates the software pack at the Date & Time set in the following
parameter.

Summary of Contents for Aprisa SR+













































































































































































































































































































































































































































































































Search results

Summary of Contents for Aprisa SR+

Reviews:

Related manuals for Aprisa SR+

Brands by name

Popular brands

4RF Aprisa SR+, User Manual

Search results

Summary of Contents for Aprisa SR+

Reviews:

Related manuals for Aprisa SR+

Brands by name

Popular brands