4ms Sampler User Manual Download Page 16

Page: 16 / 20

[AUTO STOP ON SAMPLE CHANGE]

Possible values:

Yes

Looping Only

Default value:

Yes

Yes:

changing to a new sample always stops/restarts playback

: changing to a new sample never interrupts playback

Looping Only

: changing to a new sample restarts playback only when looping

[PLAY BUTTON STOPS WITH LENGTH AT FULL]

Possible values:

Yes

Default value:

Yes

Play

buttons act as start/re-start, unless

Length

is at 100%, then they act as start/stop

Play

buttons always act as start/re-start sample

[QUANTIZE CHANNEL 1 1V/OCT JACK]

Possible values:

Yes

Default value:

Whether or not the

Pitch

CV jack is quantized to semitones

[QUANTIZE CHANNEL 2 1V/OCT JACK]

Not used on the

Sampler

[SHORT SAMPLE PERCUSSIVE ENVELOPE]

Not used on the

Sampler.

Percussive envelopes can be disabled by setting FADE TIME to 0.

[CROSSFADE SAMPLE END POINTS]

Not used on the

Sampler.

Crossfading can be disabled by settings FADE TIME to 0 (see below).

[STARTUP BANK CHANNEL 1]

Possible values: any number from 0 to 59, specifying which bank to jump to when powering up.

The ones digit of the bank number equals color of the bank, with 0 = White, 1 = Red, … 9 = Pearl.

The tens digit of the bank number equals the number of blinks (ranging from 0 to 5).

Therefore 3 means Yellow (no blinks), and 41 means Red-4 (four blinks).

[STARTUP BANK CHANNEL 2]

Not used on

Sampler

[TRIG DELAY]

Possible values: any whole number between 1 and 20, which sets the trigger delay in milliseconds.

Default: 8 (which is 8ms).

This is the amount of delay automatically added after a trigger is received on the

Play/Rec

trigger

jack, before the

Pitch

CV and

Start Pos

CV jacks are read and the sample is played. This delay allows

the

Sampler

to work with sequencers and keyboards which output a gate before the CV stabilizes at a

voltage.

[FADE TIME]

Possible values: any number between 0 and 255 which translates to a fade time in milliseconds. The

value of 0 means no crossfading will happen.

Default: 24 (which is 24ms).

See the section

Adjustable Fade Time

on page 15 for an explanation of this feature.

This value can also be controlled on the

Sampler

by holding

Reverse

and turning

Length

[AUTO INCREMENT REC SLOT ON TRIG]

Not used on the

Sampler

(future firmware version will support it).

Page of

Summary of Contents for Sampler





















Search results

Summary of Contents for Sampler

Reviews:

Brands by name

Popular brands

4ms Sampler, User Manual

Search results

Summary of Contents for Sampler

Reviews:

Brands by name

Popular brands