©
2008 4IPNET, INC.
8
4ipnet WHG301 User
’
s Manual
3.1.4 Installation Steps
Please follow the steps below to install 4ipnet WHG301:
1. Connect the 12V power adapter to the power socket on the rear panel. The Power LED should be on to indicate
a proper connection.
2. Connect an Ethernet cable to the WAN1 Port on the front panel. Connect the other end of the Ethernet cable to
an xDSL/cable modem, or a switch/hub on the LAN of a company/organization. The LED of this port should be
on to indicate a proper connection.
3. Connect an Ethernet cable to one of the LAN1~LAN8 Ports on the front panel. Per your needs, connect the
other end of the Ethernet cable to an administrator PC for configuring the WHG301 system, an AP for extending
wireless coverage, a switch for connecting more wired clients, or a client PC. The LED of the connected port
should be on to indicate a proper connection.
WHG301 supports Auto Sensing MDI/MDIX. You may use either a straight-through or a cross-over
Ethernet cable to connect the Ethernet port.
Summary of Contents for WHG301
