Quick Installation Guide
Quick Installation Guide
Quick Installation Guide
Quick Installation Guide
EAP700 Enterprise Access Point
ENGLISH
©
2010 4IPNET, INC.
- 8 -
Getting Started
4ipnet EAP700 supports web-based configuration. Upon the completion of hardware installation,
EAP700 can be configured through a PC by using its web browser such as Mozilla Firefox 2.0 or
Internet Explorer version 6.0 and the above.
The default values of LAN IP address and subnet mask of EAP700 are:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
•
To access the web management interface, connect the administrator PC to the LAN port of
EAP700 via an Ethernet cable. Then, set a static IP address on the same subnet mask as
EAP700 in TCP/IP of your PC, such as the following example (Please note that the IP
address used shall not be duplicated with the IP address of other devices within the same
network.). In the Local Area Connection Properties, selecting the Internet Protocol (TCP/IP)
Properties, use the following IP address as the default setting:
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
•
Launch the web browser on your PC by entering the IP address of EAP700
(http://192.168.1.1) at the address field, and then press Enter. The following Administrator
Login Page will then appear. Enter “admin” for both the Username and Password fields,
and then click Login to log in.
Username: “admin”
Password: “admin”
Summary of Contents for EAP700
Page 1: ...EAP700 V1 10 ...
