4IPNET EAP210, User Manual

Page: 142 / 166

User’s Manual
Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
141
8.2.2 Advanced Wireless Settings
The administrator can set the RTS threshold on this page. In most circumstance, the default settings can
meet general requirements. If occasionally wireless network needs to be tuned, the following parameters will
assist with that purpose.

RTS Threshold: To control station access to the medium and to alleviate this effect of the hidden
terminal problem, the administrator can tune this RTS threshold value. A lower RTS Threshold setting
can be useful in areas where many client devices are associating with the Access Point or in areas
where the clients are far apart and can detect only Access Point and not each other.

Roaming: When the Access Point is mobile and is operating in CPE mode, Enable the Roaming
feature to determine:

Background Scanning Period: The AP scans in the background for a signal with a
higher RSSI at each configured time interval (in seconds).

Roaming Check RSSI Threshold: When the signal falls below the configured RSSI
threshold, the AP begins scanning for higher RSSI signals to associate to.

Choose Scan and Connect Channels: This allows the administrator to manually select and filter
undesired channels. DFS channels are highlighted in red.