User’s Manual
Enterprise Access Point
ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
23
Back Panel
1
2
3
4a (2)
4b (2)
4a (1)
4b (1)
EAP706 Back Panel
1 Uplink (PoE) Port
For Uplink connection. This port can be used to connect to a controller,
gateway, or directly to the internet. PoE is supported.
2 110 Punchdown Block
(Pass-through)
Copper wire punch down for wiring bypass.
3 110 Punchdown Block
(Uplink PoE)
Copper wire punch down for Uplink connection. This can be used to
connect to a controller, gateway, or directly to the internet. PoE is
supported.
4a SMA Connectors (2.4GHz)
Connect external antennas for RF Card A here. (1) is the primary
antenna connector while (2) is the secondary connector.
4b SMA Connectors (5GHz)
Connect external antennas for RF Card B here. (1) is the primary
antenna connector while (2) is the secondary connector.
Summary of Contents for EAP210
Page 1: ...Enterprise Access Point Indoor EAP Series Outdoor OWL Series ...
Page 147: ...User s Manual Enterprise Access Point ENGLISH Copyright 4IPNET INC All rights reserved 146 ...
Page 158: ...User s Manual Enterprise Access Point ENGLISH Copyright 4IPNET INC All rights reserved 157 ...
Page 159: ...User s Manual Enterprise Access Point ENGLISH Copyright 4IPNET INC All rights reserved 158 ...