User’s Manual
Enterprise Access Point
ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
49
2.4 Access Web Management Interface
4ipnet Access Points support web-based configuration. When hardware installation is complete, the AP can
be configured through a PC by using a web browser.
The default values of the AP
’s LAN IP Address and Subnet Mask are:
IP Address:
192.168.1.1
Subnet Mask:
255.255.255.0
Example of entering the AP's default IP Address into a web browser
To access the web management interface (WMI), connect the administrator PC to the LAN port of the
AP via an Ethernet cable. Then, set a static IP Address on the same subnet mask as the AP in
TCP/IP settings of your PC, such as the following example:
IP Address
:
192.168.1.100
Subnet Mask
:
255.255.255.0
Note:
Please note that the IP Address used should not overlap with the IP Addresses of
any other device within the same network to avoid IP conflict.
Launch the web browser on your PC and enter the IP Address of the AP (
192.168.1.1
) at the address
field, and then press
Enter
. The following Administrator Login Page will
appear. Enter “admin” for
both the
Username
and
Password
fields, and then click
Login
.
Administrator Login Page
After a successful login into AP, a
System Overview
page of the Web Management Interface (WMI)
will appear.
Summary of Contents for EAP210
Page 1: ...Enterprise Access Point Indoor EAP Series Outdoor OWL Series ...
Page 147: ...User s Manual Enterprise Access Point ENGLISH Copyright 4IPNET INC All rights reserved 146 ...
Page 158: ...User s Manual Enterprise Access Point ENGLISH Copyright 4IPNET INC All rights reserved 157 ...
Page 159: ...User s Manual Enterprise Access Point ENGLISH Copyright 4IPNET INC All rights reserved 158 ...