Multi-Function Gigabit Wireless-N Client Bridge
Version 2.0
53
Ensure that you have downloaded the appropriate firmware from the vendor’s
website. Connect the device to your PC using an Ethernet cable, as the firmware
cannot be upgraded using the wireless interface.
Click
on
the
Browse
button to select the firmware and then click on the
Apply
button.
3.4.4 Restore to Factory Default
Click on the
Configure
link in the navigation menu
Click on the
Reset
button to reset the device to the factory default settings.
Once the dialog box appears, click on the
OK
button to confirm the action.
Note
: The current settings will be lost.
Click on the
OK
button to continue. You will then see the
Rebooting
page.
Please wait while the system is rebooting.
Note
: Do no un-plug the device during this process as this may cause permanent
damage.
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299