Multi-Function Gigabit Wireless-N Client Bridge
Version 2.0
10
2. Select
Internet Protocol (TCP/IP)
and then click on the
Properties
button. This will
allow you to configure the TCP/IP settings of your PC/Notebook.
3. Select
Use the following IP Address
radio button and then enter the IP address
and subnet mask. You may follow the example below. Please Ensure that the IP
address and subnet mask are on the same subnet as the device.
For Example:
Device IP address: 192.168.1.2
PC IP address: 192.168.1.21
PC subnet mask: 255.255.255.0
4. Click
on
the
OK
button to close this window, and once again to close LAN properties
window.
3 Web Configuration
3.1 Logging In
To configure the device through the web-browser, enter the IP address of the Bridge
(default:
192.168.1.2
) into the address bar of the web-browser and press
Enter
.
Make sure that the device and your computers are configured on the same subnet.
Refer to
Chapter 2
in order to configure the IP address of your computer.
After connecting to the IP address, the web-browser will display the login page.
Enter
admin
for both the user name and password.
After logging in you will see the graphical user interface (GUI) of the device. The
navigation drop-down menu on left is divided into five main sections:
1.
System
: This menu includes the status, schedule, event log, and monitor.
2.
Wireless
: This menu includes status, basic, advanced, security, WPS, Client list,
VLAN, and WMM. Through this section, you can also change the device operating
mode, such as Access Point, Client Bridge, WDS Bridge, or Universal Repeater.
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
