Multi-Function Gigabit Wireless-N Client Bridge
Version 2.0
18
3.2.4.2
Access Point Operating Mode
In order to configure the device as an Access Point,
select
Access Point
from the Operating Mode
drop-down list.
A dialog box will appear to notify you that the
system will restart in order for the change to take
effect. Click on the
OK
button to continue.
Please wait while the device counts down and
restarts into the new operating mode.
Once the device has restarted into Access Point
mode, you will see a new drop-down menu with
nine options which are: Status, Basic, Advanced,
Security, Filter, WPS, Client List, VLAN, and WMM.
Each of the options is described in detail below.
3.2.4.2.1 Status
Click on the
Status
link under the
Wireless
drop-down menu. This page will display
the current wireless settings such as SSID, Channel, Security and BSSID (MAC
address)
3.2.4.2.2 Basic
Click on the
Basic
link under the
Wireless
drop-down menu. This page will display
the current wireless settings such as SSID, Channel, Security and BSSID (MAC
address).
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
