4B Watchdog Super Elite, Operation Manual, Page: 33 / 76

PAGE 33
12. SETUP -
MENU > SETUP (PASSWORD)
There are seven password protected settings within the setup menu (Image 16): PROFILE, TEST,
FACTORY SETTINGS, SD CARD, TIME & DATE, CHANGE PASSWORD and NETWORK. All of these
settings are explained in detail within individual sections of this manual.
12.1 PASSWORD -
In order to make any system changes to the Watchdog, an engineering password is required. The
default engineering password set at the factory is BBBB.
You can change the password from the factory setting within this menu by choosing CHANGE
PASSWORD. The password is from 1 to 8 characters long, and can be any combination of the letters A,
B and C. If you change the password from the factory default, make a note of your new password.
NOTE
If the engineering password has been changed from the factory default and you have forgotten your
new password, contact 4B for assistance.
Exit OK
Image 16
Setup
View Settings
Setup
Reset Eng. Password
12. SETUP
Back OK
Image 17
Setup Menu
Profile
Test
Factory Settings
SD Card
Time & Date
Change Password
Network
NOTE
Settings shown in yellow text indicate that the value is locked. The value can only be modified within
the FACTORY SETTINGS menu, which requires an administrator password.