Chapter 5. Installing the Battery Backup Unit
38
3ware Sidecar Kit with the 9650SE-4LPME: Installation Guide
Figure 16. Points of connection on the controller
Installation Instructions
1
Remove the screw head from the plastic post on the BBU
control module and set it aside (you will reattach it soon.)
Figure 17. Removing the head from the plastic post
2
Position the BBU control module above the controller and align
the BBU control module and the controller, making sure to:
Mate the connector on the BBU control module with the
receptacle on the controller.
Match the plastic post on the BBU with the hole on the
controller. (Figure 18)
b) BBU receptacle c) Hole for post
a) Slots for the clips
Summary of Contents for 9650SE-4LPME
Page 50: ......
