Step 1. Install the 9650SE-4LPME RAID Controller in your Computer
www.3ware.com
15
6
Position the card in the PCI Express slot so that the contacts
will mate with the grooves in the slot, and all pins make proper
contact with the PCI Express slot pins when pushed into place.
7
Press down gently on the edge of the 3ware RAID controller
directly above the PCI Express slot until it is fully seated.
Figure 4. Inserting Controller Into PCI Express Slot
8
Check that the 3ware RAID controller’s metal bracket covers
the hole in the case and secure the bracket with the screw that
was used to secure the filler bracket in step 5.
When you tighten the screw on the bracket to the enclosure,
make sure the card is not slanted in any direction; otherwise the
card will not work properly.
9
Close the case.
Use a PCI Express slot
for the 3ware 9650SE
controller.
If you are uncertain
what slots you have,
refer to the
documentation for
your motherboard.
Do NOT use a PCI
or PCI-X slot.
Summary of Contents for 9650SE-4LPME
Page 50: ......
