This device supports WEB management and configuration.
Computer can access the device via Ethernet interface. The
way of logging in to device’s configuration interface via IE
browser is shown as below:
Step 1
Configure the IP addresses of computer and the
device to the same network segment, and the
network between them can be mutually accessed
Step 2
Enter device’s IP address in the address bar of the
computer browser.
Step 3
Enter device’s user name and password in the
login window as shown below.
Step 4
Click “OK” button to login to the WEB interface of
the device.
Notes:
The default IP address of the device is “192.168.1.254”.
The default username and password of the device is
“admin12345”.
If the username or password is lost, user can restore it to
factory settings via device DIP switch or management
software; all modified configurations will be cleared
after restoring to factory settings, so please backup
configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【
Specification
】
Panel
100M copper port
10/100 Base-T(X) , RJ45 port,
full/half duplex self-adaption,
support MDI/MDI-X auto-tunning
100M fiber port
100Base-FX fiber port is
full-duplex SC/ST/FC interface
Gigabit copper port
10/100/1000Base-T(X)
self-adaption
Gigabit fiber port
1000Base-X, 1×9 fiber port
Gigabit SFP slot
1000Base-X, SFP
Console port
CLI command management port
(RS-232), RJ45
Indicator
management card running
indicator, power supply indicator,
upward/downward cascading
indicator of management card,
CONSOLE port connection
indicator, daughter card running
indicator, LFP link failure alarm
indicator, interface connection
indicator
Power supply
Input power supply
85~264VAC/DC, support dual
power supply redundancy
Power consumption
Full-load
34.46W@220VAC
Working environment
Working temperature
-40
～
75
℃
Storage temperature
-45
～
85
℃
Working humidity
0%
～
95% (no condensation)
