CLI user manual
56
Operating
Command
Description
System timeout setting
Set
<time_out>
<time_out>
：
The system timeout, value of [0-60], the
unit minute, a default timeout value of 5 minutes;
0 --Close timeout function
Example: set the system time is 10 minutes
Switch (manage)#
set 10
[OK]
The system is used to define the time, when to enter the CLI configuration mode, do not do any
operation timeout. The system after a timeout will automatically jump to the user mode, the new
username and password authentication.
16.3 IP address and default gateway setting
The user can set the following command equipment IP, default gateway address
Table 16.3.1 device IP address, default gateway address setting:
Operating
Command
Description
The
device
IP
address
configuration
Ip
<A.B.C.D> <A1.B1.C1.D1>
<A.B.C.D>
：
ip address
<A1.B1.C1.D1>
：
The subnet mask
The default gateway
configuration
Gateway
<A.B.C.D>
<A.B.C.D>
：
The gateway address
Example: the equipment configuration for 192.168.254 IP 255.255.255.0, subnet mask, default gateway
for 192.168.1.1
Switch(Manage)#
ip 192.168.1.254 255.255.255.0
[OK]
Switch(Manage)#
gateway 192.168.1.1
[OK]
16.4 User name, password settings
The user can set the user name, password following command
Table 16.4.1 user name, password settings:
Operating
Command
Description
User name setting
Hostname
<hostname>
<hostname>
：
The user name string
User
password
setting
Password
<password>
<password>
<password>
：
The user password
string
