manualshive.com logo in svg

3onedata IES615-2DI Series, User Manual

Share
Download
3onedata IES615-2DI Series User Manual Download Page 28

                                                                                            CLI user manual

 

23

 

Chapter 4 Port Configuration 

Port  information  including  link  state  (link  or  LOS),  the  port  state  (full  or  half),  rate  mode 
(automatic negotiation, 10Mbps, 100Mbps),  interface type (electric or optical), flow control, 
port is enabled. 

4.1 Port information 

The Ethernet port characteristics of the switches support: 
10/100Base-Tx Ethernet port can operate in half duplex, full duplex, auto negotiation mode. 
Support  MDI/MDIX  adaptive,  and  able  to  negotiate  with  other  network  devices,  automatic 
selection  of  the  most  appropriate  way  of  working  and  rate,  which  greatly  simplifies  the 
configuration and management system; 100Base-FX port, rate of 100Mbps, working in full 
duplex mode, flow control can be set. 
Enter the port configuration view 
Table 4.1.1 to enter the port configuration view: 

Table 4.1.1 

Operating 

Command 

Description 

Enter  the  port  configuration 

view 

port 

In view of the system under the 

 
Switch#

 port

 

Switch(port)#

 ?

 

    List                                          --List commands of current menu 
    Help                                          --Help commands of current menu 
    Quit                                          --Quit from CLI 
    Exit                                          --Exit from current menu 
    Reboot                                      --Reboot switch 
    Show state                              --Show port state information 
    Show config                            --Show port config information 
    Switch                                      --Set enable state for the port 
    Flow-con                                  --Set flow control for the port 
    Mode                                          --Set the rate,duplex for the port 
 
 

4.2 Display port configuration information 

Table 4.2.1 shows the command port configuration information: 

Table 4.2.1 

Operating 

Command 

Description 

Display port state information 

Show state

 

<portlist>

 

<portlist>

：

1,3 or all 

Display 

port 

configuration 

information 

Show config

 

<portlist>

 

<portlist>

：

1,3 or all 

 

Summary of Contents for IES615-2DI Series

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands