3onedata IES615-2DI Series, User Manual

Page: 22 / 64

CLI user manual
17
3.3 Clear serial incorrect information
Please check table 3.3.1
Table 3.3.1
Operating Command Description
Clear serial incorrect
information
clear err <port_list>
<port_list> : Choice the port number of serial
1
、
2
、
3
、
4 or all optional
3.4 Serial parameter configuration
Please check table 3.4.1
Table 3.4.1
Operating Command Description
Configuration
serial parameter
config < Baudrate >
<parity>
<Databits>
<stopbits>
< Baudrate >
：
{300,600,1200,2400,4800,9600,19200,38400,57600,11
5200}
<parity>
：
0 --None
1 --Odd
2 --Even
3 --Mark
4 --Space
<Databits>
：
0 --5bits
1 --6bits
2 --7bits
3 --8bits
<stopbits>
：
0 --1bit
1 --2bits
Configuration
serial data frames
Set packs_bytes
<Packs_bytes>
<Packs_bytes> : data frames range1-1460(byte)
Configuration
serial character
time space
Set packs_time
<Packs_time>
<Packs_time>
：
Character time space 1~500 ms
Configuration
serial working
mode
Set Com_mode
<Com_mode >
< Com_mode >
：
working mode
0 RS-232
1 RS-422
2 RS-485
Example: Configuration COM2 parameter, baud rate: 300bps, parity: ODD, data bits: 6 bits, stop bits:
2bits, enter the bold type command as follows and enter return key:
Serial(COM2)# config 300 1 1 1
[OK]
Example: Configuration data frames is 300 bytes, enter the bold type command as follows and enter