100BaseFX port
100Base-FX full-duplex SM or MM port , SC/ST type .The fiber port must be used in pair, TX (transmit) port connect remote switch’s RX(receive)
port; RX(receive) port connect remote switch’s TX(transmit) port.
The optical fiber connection supports the line to instruct enhance the reliability of network effectively
.
Suppose
: If you make your own cable, we suggest labeling the two sides of the same line with the same letter (A-to-A and B-to-B, shown as below, or
A1-to-A2 and B1-to-B2).
【
LED indicator
】
LED indictor light on the front panel of IES2010-2GS-4F Series .the function of each LED is described in the table as below.
【
Power Input
】
IES2010-2GS-4F Ethernet switch provides 4 bits industrial terminal blocks
（
V1-
、
V1+
、
V2-
、
V2+
）
，
V-
、
V+ is 12VDC
～
48VDC power input.
System Indication LED
LED
State
Description
ON
Power is being supplied to
power input PWR input
PWR
（
green
）
OFF
Power is
not
being supplied to
power input PWR input
ON
FX port is active
OFF
FX port is inactive
Link
（
green
）
Blinking
Data is being transmitted
Each RJ45 has two LED indicator
ON
100M work mode
（
100Base-TX
）
10M/100M
（
green
）
OFF
10M work mode
（
10Base-T
）
ON
Network connection is active
Blinking
Network is running
Link/ACT
（
green
）
OFF
Network connection is
not
active
