31
4.3.4 Set Black Mark Sensor as Media Sensor and Calibrate the Black Mark Sensor
Please follow the steps as below.
1.
Turn off the power switch.
2.
Hold on the button then turn on the power switch.
3.
Release the button when LED turns blue/purple after 5 blue blinks (any blue/purple will do
during the five blinks).
The LED color will be changed as following:
Purple
red (5 blinks)
purple (5 blinks)
blue (5 blinks)
blue/purple (5 blinks)
red/purple (5 blinks)
solid blue
4.3.5 Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor
Please follow the steps as below.
1.
Turn off the power switch.
2.
Hold on the button then turn on the power switch.
4.3.6 Skip AUTO.BAS
XPL programming language allows user to download an auto execution file to flash memory. Printer
will run the AUTO.BAS program immediately when turning on printer power. The AUTO.BAS
program can be interrupted without running the program by the power-on utility.
Please follow the procedures below to skip an AUTO.BAS program.
1.
Turn off printer power.
2.
Press the FEED button and then turn on power.
3.
Release the FEED button when LED becomes solid blue.
The LED color will be changed as following:
Purple
red (5 blinks)
purple (5 blinks)
blue (5 blinks)
blue/purple (5 blinks)
red/purple
(5 blinks)
solid blue
4.
Printer will be interrupted to run the AUTO.BAS program.