![background image](http://html1.mh-extra.com/html/3nstar/ltt324/ltt324_user-manual_4598500029.webp)
27
Self-test printout
Model name
F/W version
Firmware
checksum Printer
S/N configuration
file System date
System time
Printed mileage (meter)
Cutting counter
Self-test
Printer will print the printer configuration after
gap/black mark sensor calibration. Self-test
printout can be used to check if there is any dot damage on the heater element, printer
configurations and available memory space.
Self-test printout
Printer model name & Main board firmware
version Printer serial number
Printed mileage
Main board firmware
checksum Serial port setting
Code page
Country
code Print
speed Print
darkness
Label size (width, height)
Black mark or gap size (vertical gap,
offset)
Sensor sensitivity
File management information