30
5.2 Printer Setting
1. Choose a connection interface between the computer and printer.
The default setting connection interface of
the printer diagnostic tools program is USB.
If the transmission is through the USB
cable link, there is no need to set this part.
Go to the next step.
2. Click the needed function in the function area.
3.Printer function introduction in the administration page of Printer Setting is as follows.
Introduction
Sensor calibration
Set the Ethernet
Set printer RTC time parameters
restore factory default and restart
Restart the printer
Print the test page
Print self-test page
Enter the printer error budgeting model
Ignore AUTO. BAS files
Set the Diagnostic Tool passwords