![background image](http://html1.mh-extra.com/html/3nstar/ltt204/ltt204_user-manual_3171101016.webp)
16
5. Pass the ribbon around the print head, and
then the right side of the ribbon recovery shaft
on the ribbon recycling axis. The left ribbon
wheel corresponds to the position of the ribbon
to the concave surface of the ribbon recovery
axis.
6.Turn the ribbon gear 2 to flatten the ribbon and
take up the slack.
7. As shown in the picture to the left, press
upward with both hands where the arrow
indicates, then close the print head. Make sure
the print head is closed completely.