Issue Date: 12/4/2012
30
Attaching the 2 Way Bracelet, cont.
Step 6:
Using the strap cutters, cut the strap
according to the measurement taken in
step six. Wipe off any fiber optic
cable residue left on the strap after
cutting has been completed.
Step 8:
Place the Bracelet on the offender’s
leg just above the ankle bone and
insert the strap with attached pin tray
into the bracket until it snaps in
place. Once in place, gently pull on
strap to ensure that device is
secured around offender’s ankle.
Step 7:
Place remaining pin tray on a flat
surface and insert measured end of the
underneath side (the bottom) of the
strap into the pin tray.
Attaching the 2 Way Bracelet