background image

3M™ Versaflo™ Powered and Supplied Air Respiratory Systems 

Additional Specifications

Respirator System
Operating Temperature

23º F to 129

°

F (-5 to 54

°

C).  

Motor blower battery alarm will activate when battery pack 

p

g

p

Operating Altitude 

Range

y

y p

internal temperature exceeds 130º F (55º C).  

Motor blower will shut down if the battery pack temperature 
reaches 140

°

F (60

°

C).

Storage Temperature 
(RH <90%)
TR-300 motor blower, 
HE filter  Battery pack

-22º F to 122ºF (-30 to 50

°

C).

Note:  40ºF to 95º F (4º C to 35º C) suggested storage. 
temperature range if product will be stored for an extended 
period of time before first use   

HE filter, Battery pack

period of time before first use.  

Optimal storage temperature for the battery pack is  59º F 
(15º C).

Shelf Life

Motor/blower: 5 years 

(

If motor blower will not be used on a regular 

y

(

g

basis, the motor must be run for 5 minutes annually to ensure proper 
lubrication and operation).

Battery pack: 9 months.

High Efficiency (HE) filter: 5 years.

8

© 3M 2011.  All Rights Reserved. Rev 1

g

y ( )

y

Prior to use, when stored in original 3M  packaging.

Summary of Contents for Versaflo TR-300





















































Reviews: