![background image](http://html1.mh-extra.com/html/3m/ss-4320/ss-4320_instructions-manual_3230440030.webp)
30
78-8122-3169-0-F
17.0 Electronic and Fiber Equipment Mounting
17.1
Two hardware kits are available for mounting electronic and fiber equipment in the 3M
™
Cross-Connect
Cabinets 4220 and 4230 Series. The 3M
™
Mounting Bracket Kit 4220-EC/GC fits into the D/DD, E/EE, and
F/G, low profile cabinets. The 3M
™
Mounting Bracket Kit 4220-KC kit fits into the KF/K and LF/L high
profile cabinets.
17.2
The support bars in the hardware kits attach to the upper and lower frame supports to provide either 19” or
23” equipment rack(s). (The 3M
™
Cross-Connect Cabinets 4220-D/DD Series will only accommodate one
19” wide equipment rack.)
17.3
Standard 3M
™
Cross-Connect Frames SS6 or SS9K or narrow 3M
™
Cross-Connect Frames SS300N or
SS450N can be mounted along side the equipment rack(s) for combined electronics/fiber and cross-connect
applications. Examples using the 4220-F cabinet are shown below.
23"
23"
19"
19"
27"
3M
™
Cross-Connect Cabinet 4220-F with
Two Equipment Racks
3M
™
Cross-Connect Cabinet 4220-F with One Equipment
Rack and one 3M
™
Cross-connect Frame SS6
17.4
The 4220 series of cabinets are 18” deep from front to back. When an electronic or fiber housing is mounted
on one side of the cabinet, there is NOT enough room to mount anything behind them.
17.5
The 4230 series of cabinets are 26” deep from front to back. In most cases there is room behind the electronic
or fiber housing to accommodate mounting cross-connect frames on the back side.
Summary of Contents for SS 4320
Page 31: ...78 8122 3169 0 F 31...