4.5 Introductory to Regeneration Process
4.4.2 To initiate a manual regeneration at the present delayed regeneration time, press and release
“REGEN”. The words “REGEN TODAY” will flash on the display to indicate that the system will regenerate
at the preset delayed regeneration time.
Note:
If you pressed the "REGEN" button in error, pressing the button again will cancel the request.
The regeneration process includes backwash, salt wash, rinse, second rinse, and water filling.
The total process takes about 50~110 minutes, depending on the model and parameters set.
When the system begins to regenerate, the display will change to include information about the step of
the regeneration process and the time remaining for that step to be completed. The system runs through
the steps automatically and will reset itself to help provide treated water when the regeneration has been
completed during the regeneration process, user can press REGEN to skip the countdown to proceed to
the next step.
4.5.1 The regeneration process screen will be displayed on the display panel. Backwashing will be
displayed first and the time remaining to complete the backwash.
4.5.2 After completing the backwashing process, the salt washing process will starts automatically and
displaying the time remaining to complete the backwash.
4.5.3 After completing the salt wash process, the system starts the second backwash process and
displaying the time remaining to complete this process.
4.5.4 After completing the second backwash process, the rinsing process will begins and the time
remaining to complete the rinse process will be displayed.
