![background image](http://html.mh-extra.com/html/3m/pentamix-2/pentamix-2_service-manual_443062026.webp)
Vers. (11/02)
Pentamix
TM
2
21
Pentamix
TM
2
10. Attach case bottom section to bottom plate using both recessed-head screws
11. Insert remaining recessed-head screws
12. Insert left-hand side cover and push down
13. Insert recessed and countersunk head screws
14. Insert right-hand side cover and push down
15. Insert recessed and countersunk head screws
NOTE
Before assembling, pass the power cable through the strain relief device provided.
16. Pass power cable through case base
17. Fit case base
18. Fix case base using recessed-head screws
19. Wind power cable in a clockwise direction 1½ turns onto reel
20. Place power cable in cable guide
21. Fit base cover and fix using recessed-head screws
22. Snap case lid into place
23. Fit twist grip and spring plate possibly using a rubber hammer
24. Install plunger discs
NOTE
Do not fit case lid on left until final test has been carried out
Summary of Contents for Pentamix 2
