Vers. (11/02)
Pentamix
TM
2
11
Pentamix
TM
2
5.4
Left and Right Hand Side Covers
CAUTION
Before opening the PENTAMIX 2 make sure you remove the
mains plug.
Changing left-hand side cover
1. Remove case base - see section 5.3
2. Carefully remove case lid left using a screwdriver for slotted-head screws
3. Remove recessed and countersunk head screw of left-hand side cover
4. Slightly raise left-hand side cover and remove sideways
5. Fit new left-hand side cover, proceeding in reverse order
Changing right-hand side cover
1. Remove base - see section 5.3
2. Carefully remove case twist grip using two screwdrivers for slotted-head screws
NOTE
The spring plate inserted in the twist grip has to be fitted with the curved side
facing the drive shaft to ensure secure locking.
3. Remove recessed and countersunk head screw of right-hand side cover
4. Slightly raise right-hand side cover and remove sideways
5. Fit new right-hand side cover, proceeding in reverse order
NOTE
Before assembling, pass the power cable through the strain relief device provided.
5.5
Case Bottom Section
Changing case bottom section
1. Remove case base - see section 5.3
2. Remove both side covers - see section 5.4
3. Remove both recessed-head screws for fixing to bottom plate
4. Remove eight recessed-head screws for fixing to case top section
5. Lift off case bottom section
6. Install new case bottom section in reverse order
7. Assembling housing - see section 5.20
8. Functional test - see section 6
Summary of Contents for Pentamix 2
