3M™ Multimedia Projector X62w Product Safety Guide
© 3M 2006
7
ENGLISH
ENGLISH
CAUTION
• To reduce the risk associated with explosion, and/or chemicals from a leaking
batteries:
- Use only with battery type AA, CR2032 or equivalent.
Use only with battery type AA, CR2032 or equivalent.
- �rient the battery�s plus (�) and minus (-) terminals of the batteries according to
�rient the battery�s plus (�) and minus (-) terminals of the batteries according to
the markings found on the remote control.
- Do not leave the battery in the remote for an extended period of time.
Do not leave the battery in the remote for an extended period of time.
- Do not heat�� disassem�le�� short�� rechar�e�� or e�pose to fire or hi�h temperat�re�
Do not heat�� disassem�le�� short�� rechar�e�� or e�pose to fire or hi�h temperat�re�
- Do not carry batteries loose in your pocket or purse.
Do not carry batteries loose in your pocket or purse.
- Avoid eye and skin contact in the event that battery would leak.
Avoid eye and skin contact in the event that battery would leak.
- Do not mix used and new batteries.
Do not mix used and new batteries.
• To reduce the risk associated with the impact of a falling projector:
- Use only the 3M™ brand wall/ceiling mounting hardware kit if wall or ceiling
Use only the 3M™ brand wall/ceiling mounting hardware kit if wall or ceiling
mounting is desired.
- �nstallation o�� the ���� wall�ceilin� �it m�st only �e per��ormed �y ��alified personnel�
�nstallation o�� the ���� wall�ceilin� �it m�st only �e per��ormed �y ��alified personnel�
- Adhere strictly to the proper installation procedure as outlined in the installation
Adhere strictly to the proper installation procedure as outlined in the installation
instructions when installing the 3M™ wall/ceiling kit.
- �lways operate the �nit on a ��at�� st�rdy�� and hori�ontal s�r��ace�
�lways operate the �nit on a ��at�� st�rdy�� and hori�ontal s�r��ace�
• To reduce the risk associated with intense visible light:
- Avoid looking directly into the projector lens while the lamp is on.
Avoid looking directly into the projector lens while the lamp is on.
• To reduce the risk associated with tripping and/or impact:
- Position the power cord and data cable so that they cannot be tripped over.
Position the power cord and data cable so that they cannot be tripped over.
