22
6.8
Unilength Splicing using 4005-DPM Super-Mate
6.8.1 Attach unilength hook to splice head as shown. Hook can be
attached on either side depending on which side of the splice
opening the cable is entering from.
Note:
Refer to Section 8.6.2 for a definition of unilength
splicing.
863364
6.8.2 Bring wire across the splice opening, then fold back
2" (51 mm) and splice.
Note:
Unilength measurement is always used
when stubs are added to a splice and for
any distribution cables in a modified fold-
back splice.
Configuration
Splice Openings
Unilength
2 bank
17" (43.2 cm) – 19" (48.3 cm)
19" (48.3 cm) – 21" (55.3 cm)
3 bank
27" (68.6 cm) minimum
29" (73.7 cm)
4 bank
36" (91.4 cm) minimum
38" (96.5 cm)
All modules preterminated at this location, then positioned in splice bundle.
All Field Cable: Unilength configuration.
893736
Splice opening plus 2" (51 mm)
FIELD
