14
3M™ MicroTouch™ Controller EX Dual Mode Reference Guide
3M Touch Systems, Inc. Proprietary Information – TSD-40848A
Self Test
Condition
LED
Flashes
Self
Test
Bit
Description
What to do...
Backplane
Error
16
15
Low resistance path from
backplane to sensor
Cycle power. If fault persists,
replace sensor.
Corner Error
17
16
Corner drive offset level is
too high
Cycle power. If fault persists,
replace controller.
Fixed Cal Error 18
17
Fixed 2-point cal error high Cycle power. If fault persists,
replace controller.
Note 1: this is a fatal error.
Note 2: this error is detected by the ROM code
Note 3: indicates that the EEPROM is not formatted when given by the ROM code
Installing 3M™ MicroTouch™ Software
3M™ MicroTouch™ Software includes the driver that enables your sensor to work with
your computer. 3M Touch Systems has touch drivers for many operating systems,
including Windows® 7, Windows® Vista, Windows® XP, Windows® XP embedded,
Windows® CE, and Linux® (Kernel 2.6) (refer to the website for a complete listing).
You must be sure to install the correct software for your operating system.
3M™ MicroTouch™ Touch Solutions include a control panel for setting your sensor
preferences and a diagnostic utility. If you are experiencing problems with the sensor,
you can use the diagnostic utilities provided to locate the controller and test the sensor.
For more information on connecting your cables and installing and using the sensor
control panel and utilities, refer to the 3M™ MicroTouch™ Software User Guides
available on the corporate website at
www.3Mtouch.com
.
