3M Digital Media System 700 Series, Operator And Product Safety Manual, Page: 17 / 288

17
3M ™ Digital Media System 700 Series
© 3M 2007. All Rights Reserved.
ENGLISH
Projector Remote Control
Remote Control Notes
ATTENTION
• Do not drop or otherwise expose the remote control to physical impact.
• Do not get the remote control wet or place it on wet objects. Doing so may result in malfunction.
• Remove the batteries from the remote control and store them in a safe place if you won’t be using the remote
control for an extended period.
• Replace the batteries whenever the remote control starts to malfunction.
• When strong lights such as direct sunlight or light from an extremely close range (such as from an inverter
fluorescent lamp) hit the projector’s remote sensor, they may cause a malfunction. Adjust the direction of the
projector to keep light from directly hitting the projector’s remote sensor.
• The remote control works with the projector’s remote sensor.
• The range of the remote sensor is 3 meters with a 60-degree range (30 degrees to the left and right of the
remote sensor). Also a remote signal reflected in the screen may be available.
• Since the remote control uses infrared light to send signals to the projector (Class 1 LED), be sure to use
the remote control in an area free from obstacles that could block the remote control’s output signal to the
projector.
Subtitle
/
/