5
Form No: 5903917 Rev: D
3M™ DBI-SALA
®
RoofSafe Anchor and Cable System
The RoofSafe Anchor
Section 2.0
2.2 Positioning of the 3M™ DBI-SALA
®
RoofSafe Anchor
When positioning the 3M DBI-SALA RoofSafe Anchor System there are two styles of placement to consider.
2.3 Anchor Activation
If a fall does occur, the anchor will deploy. Once deployed, the Anchor must be removed from the roof and the roof inspected
for damage or signs of structural weakening. Only once the roof has been passed as fit for purpose can another Anchor
be installed.
Work Restraint
A Restraint System is designed
to prevent a user accessing
risk areas (such as roof edges),
thereby preventing a fall.
Fall Arrest
A Fall Arrest System allows
access to a fall hazard and is
designed to safely arrest the
operative in the event of a fall.
01
02
Pre-deployed
Deployed- Report to an certified
3M Fall Protection Installer and
do not use.
Important Note.
Whilst all Anchor installations must be designed for
Fall Arrest in case of accidental misuse, it is recommended
that the positioning of the Anchor should be located for
Work Restraint. Restraint enables a user to access their
work area whilst being prevented from gaining access
to a fall hazard and will reduce risk and mitigate against
the consequences of a fall.
Form No: 5903917 Rev: D
