02
01
22
Form No: 5903917 Rev: D
3M™ DBI-SALA
®
RoofSafe Anchor and Cable System
Using The System
Section 16.0
Prior to attaching the UniGrab, consider your required orientation on the system. The correct orientation of the UniGrab is dependent
on the position of the System. Firstly, look at which side of the lifeline you wish to walk on. The opening of the UniGrab should face
towards the surface to which the lifeline is attached and the attachment point of the UniGrab should be facing towards the side you
want to walk on.
16.4 Working on both sides of the 3M Fall Protection System
To remove the UniGrab, reverse the procedure on page 9. If you wish to walk on the opposite side of the system you may turn
the UniGrab around. Firstly, attach a secondary lanyard (or twin-tailed lanyard) to the system. Then detach the UniGrab, turn it
to the correct direction and re-attach.
During use, operatives should allow their lanyard to trail behind them. On reaching an intermediate bracket the UniGrab should
pass unhindered.
Form No: 5903917 Rev: D
