Model C960SL
Special Instructions for System Manager
3M 2003
15
Keep the following information in mind as you operate the system and as you
establish operating procedures:
•
Avoid shorting across the battery contacts with metal items. Never carry a
battery in a pocket or place it in a drawer where it can accidentally be
shorted by keys, coins etc.
•
Have adequate charging capacity for the number of transceiver packs in
your system. One battery charger will handle up to three transceiver
packs. Use of more than three transceiver packs requires an additional
battery charger.
•
Batteries perform best at moderate temperatures. Extremes of heat and
cold reduce their performance.
The transceiver packs are factory programmed for single-lane operation to
enable the operator to press either T1 or T2 to communicate with lane 1.
For cross-lane systems, the transceiver packs must also be programmed to
enable communication with either lane 1
or
lane 2. With the cross-lane
module turned ON, the lane 1
or
lane 2 operators can press T1 to talk to lane 1
customers or T2 to talk to lane 2 customers.
To program the transceiver pack for cross-lane operation:
•
While pressing and holding
both
the T1 and T2 switches on the
transceiver pack, turn the unit ON. Hold all three switches for at least 5
seconds. See Figure 13.
•
Audible tones will be heard in the compact earset earphone, indicating that
the transceiver pack is programmed for cross-lane operation.
Figure 13.
If you no longer need the cross-lane feature, reprogram the transceiver pack by
repeating the above procedure.
Important Information
about C960SL
Rechargeable Batteries
Programming the
Transceiver Pack for
Cross-Lane Operation
Reprogramming
