3M C960SL Operating Instructions Manual Download Page 9 | Manualshive

Page: 9 / 27

3M C960SL Operating Instructions Manual Download Page 9

Model C960SL

Controls and Indicators



3M 2003

3

The base station controls and indicators are shown below.

Figure 4. Base Station Controls and Indicators

The ON/OFF switch controls power to the base station.

This indicator lights when the ON/OFF switch is in the ON position.

9

Note

If for some reason the C960SL Compact Wireless System does not
operate and the system includes an optional wired backup system,
turn off the C960SL Base Station to enable the backup system.

With the switch in the DAY position, the volume of the menu sign speaker
is increased for daytime operation. With the switch in the NIGHT position,
the volume of the menu sign speaker is decreased for nighttime operation.
(Sound travels further and more efficiently at night.)

These indicators light to show which of the 8 radio channels is selected.

This indicator lights when Page communications occur.

This indicator lights when "Talk" communications occur.

This indicator lights when a vehicle is detected.

This access hole allows for adjusting the volume of an optional monitor
speaker.

Base Station

1 ON/OFF Switch

2 POWER Indicator

3 VOLUME

DAY/NIGHT
Switch

4 Channel Indicators

5 Page

Indicator

6 Talk

Indicator

7 Vehicle

Indicator

8 Monitor

Volume

Access

«
...
7
8
9
10
11
...
»

Summary of Contents for C960SL




























Reviews:

No comments