5 of 6
Programming the Headsets for Cross–Lane Operation
Follow the steps below to program the headsets for Cross–Lane operation, and disable the Talk—Lock function.
It does not matter which base station is used to program the headsets. By pressing
T1
, the headset will
communicate with the lane 1 base station; by pressing
T2
, the headset will communicate with lane 2 base
station.
1. Disable the Talk Lock function:
Talk–Lock is a toggle function that must be checked first to see if it is enabled or disabled. If the Talk LED on
the base station lights when the
L
button is pressed, Talk–Lock is enabled.
• To disable Talk–Lock, turn the headset
OFF
, press and hold the L button while pressing
ON
for 5
seconds. You will hear a series of beeps indicating that Talk–Lock is off.
• Recheck the Talk–Lock function by pressing the
L
(talk-lock) button. The Talk LED on the base station
should not light.
2.
Programming the headsets for Cross–Lane Operation:
a. Start with the headset
OFF
. Then, hold down the
T1
and
T2
buttons while pressing
ON
for 5 seconds.
You will hear a series of beeps indicating that the headset has been programmed.
b. Verify that the headsets are properly programmed for Cross–Lane operation as follows:
(1)
Press
T1
and verify that the Talk LED lights on the lane 1 base station and does not light on the lane
2 base station.
(2)
Press
T2
and verify that the Talk LED lights on the lane 2 base station and does not light on the lane
1 base station.
c. To remove the Cross–Lane function and return the headsets to the normal (single lane) operating mode,
first turn the headset
OFF
, and then do one of the following operations:
–
For lane 1 operation only,
hold down
T1
while pressing
ON
for 5 seconds. You will hear a
series of beeps indicating that Cross–Lane function is no longer active. Reprogram the headsets
from the lane 1 base station if you want to communicate with lane 1.
–
For lane 2 operation only,
hold down
T2
while pressing
ON
for 5 seconds. You will hear a
series of beeps indicating that Cross–Lane function is no longer active. Reprogram the headsets
from the lane 2 base station if you want to communicate with lane 2.
Operation
Cross–Lane Module OFF:
Vehicle detector alerts
The operator will only hear the vehicle detector alert from the menu sign with which he or she last
talked. Vehicles at menu sign 1 will be heard as a single repeating alert. Vehicles at menu sign 2 will be
heard as a double repeating alert.
Answering customers
Pressing
T1
will only allow communications with the lane 1 customer. Pressing
T2
will only allow
communication with the lane 2 customer.
Summary of Contents for C860
Page 55: ...3 Figure 3 2 ...
Page 59: ...3 Figure 3 2 ...
