background image

 

3M™ Dual-Touch Chassis Displays User Guide 

 

3M Touch Systems, Inc. Proprietary Information – TSD-42846A

 

 

An inherent characteristic of the PCT sensor is a fine grid pattern that may be visible 
under certain lighting conditions. 

 

Do not install this display in areas where extreme vibrations may be generated. For 
example, nearby manufacturing equipment may produce strong vibrations. The 
vibrations may cause the display to exhibit picture discoloration or poor video quality. 

Maintaining Your Touch Display 

To maintain your display and keep your display operating at peak performance: 

 

Keep your display and touch sensor clean. 

 

Adjust the display video controls.   

 

Do not install the display in a place where ventilation may be hindered.  Always 
maintain adequate ventilation to protect the display from overheating and to promote 
reliable and continued operation. 

Touch Sensor Care and Cleaning 

The touch sensor requires very little maintenance. 3M Touch Systems recommends that 
you periodically clean the glass touch sensor surface. Be sure to turn off your display 
before cleaning. 

Typically, an isopropyl alcohol and water solution ratio of 50:50 is the best cleaning 
agent for your touch sensor.  

 

Apply the cleaner with a soft, lint-free cloth.  Avoid using gritty cloths. 

 

Always dampen the cloth and then clean the sensor.  Be sure to spray the cleaning 
liquid onto the cloth, not the sensor, so that drips do not seep inside the display or 
stain the bezel. 

 

 

CAUTION

 

To avoid the potentially hazardous situations associated with the use of alcohol or 
other solvents which may cause minor or moderate injury or property damage: 

 

Follow all instructions and recommendations in the manufacturer's Material Safety 
Data Sheet and product label. 

 

Be sure to follow solvent manufacturer's precautions and directions for use when 
using any solvents 

 

It is important to avoid using any caustic chemicals on the touch sensor.  

3M Touch Systems Support Services 

3M Touch Systems, Inc. provides extensive support services through our website and 
technical support organization. Visit the 3M Touch Systems website at 

http://www.3m.com/touch/

, where you can download software and drivers, obtain 

regularly updated technical documentation on 3M Touch Systems products, and learn 
more about our company. 

Whenever you contact Technical Support, please provide the following information: 

 

Touch display size, part number and serial number 

Summary of Contents for C1510PS





















Reviews: