3M AccuGlide II 29600, Instructions And Parts List

Page: 8 / 36

3
Specifications
Limited by
case sealer
1. Tape:
For use with “Scotch” brand pressure-sensitive film box sealing tapes.
2. Tape Width:
36 mm [1.50 inch] maximum
3. Tape Roll Diameter:
Up to 405 mm [16 inch] maximum on a 76.2 mm [3 inch] diameter core.
(Accommodates all system roll lengths of “Scotch” brand film tapes.)
4. Tape Application Leg Length – Standard:
50 mm
±
6 mm [2 inch
±
0.25 inch]
Tape Application Leg Length – Optional:
70 mm
±
6 mm [2.75 inch
±
0.25 inch] (See "Adjustments – Tape Leg Length", page 13.)
5. Box Size Capacities:
For use with center seam regular slotted containers.
Minimum Maximum
Length – 150 mm [6 inch] Unlimited
Height – 120 mm [4.75 inch] (most “3M-Matic” case sealers)
70 mm [2.75 inch] (with 2 inch leg length)
Width – Limited by case sealer Limited by
case sealer
When lower taping head is used on “3M-Matic” case sealers, refer to the respective instruction manual
specifications for box weight and size capacities.
6. Operating Rate:
Conveyor speeds up to 0.40 m/s [80 FPM] maximum.
7. Operating Conditions:
Use in dry, relatively clean environments at 5
°
to 40
°
C [40
°
to 105
°
F.] with clean dry boxes.
Important – Taping heads should not be washed down or subjected to conditions causing moisture
condensation on components.
7. Taping Head Dimensions:
Length – 457 mm [18.00 inch]
Height – 560 mm [22 inch] (with tape drum)
Width – 91 mm [3.62 inch] (without mounting spacers)
Weight – Packaged: 8.2 kg [18 lbs.] Unpackaged: 7.2 kg [16 lbs.]