2
The “Tape Threading Label”, shown in Figure 1-2,
is attached to the left side of the taping head. This
label provides a convenient tape threading diagram.
More detailed tape loading and threading
information is provided in the "Operation" section
this manual.
Turn air and electrical supplies "off" before
servicing taping head.
This safety alert symbol identifies
important safety messages in this
manual. READ AND UNDERSTAND
THEM BEFORE INSTALLING OR
OPERATING THIS EQUIPMENT.
Important Safeguards
The “Warning-Sharp Knife” label warns operators
and service personnel of the extremely sharp knife
used to cut the tape at the end of the box sealing
operation. The label shown in Figure 1-1 is located
on the orange knife guard between the applying
roller assembly and the buffing roller assembly.
Never operate taping head with knife guard
removed.
Before working with the taping head or loading/
threading tape, refer to Figures 3-1 and 3-2 to
identify the knife location. Keep hands out of these
areas except as necessary to service the taping
head or to load/thread tape.
Figure 1-1 – Knife Warning Label
Figure 1-2 – Tape Threading Label
Important – In the event the following safety
labels are damaged or destroyed, they must
be replaced to ensure operator safety. See
Parts Drawing/Lists, pages 18-31 for label
part numbers.
Summary of Contents for AccuGlide II 29600
