3
4
WARNING
To reduce the risks associated with all residual hazards:
• Read, understand, follow and retain for future reference all safety statements in
each applicable equipment owner’s manual and refer to the applicable Material
Safety Data Sheet and material container label for each material to be sprayed
before using your 3M equipment.
• This equipment is to be used only by professionals familiar with the possible
applicable safety hazards.
• Do not use this product around unsupervised children.
• Never modify any part of this product.
• Always comply with local, state, and national codes governing ventilation, fire
protection, operation, maintenance, housekeeping and disposal plus all safety
statements in applicable owner manuals, MSDS and material container labels.
To reduce the risks associated with chemical exposure:
• Never point a spray gun at anyone else or place any part of your body in front of
a spray nozzle.
• Before use, check spray equipment for damage and proper function and repair/
replace worn, damaged or malfunctioning components.
• Always wear appropriate, approved personal protective equipment for eye,
skin, respiratory and hearing protection per the applicable MSDS and material
container labels at all times when spraying.
To reduce the risks associated with fire and explosion:
• Must maintain adequate ventilation per applicable MSDS and material container
labels for each material being sprayed in the work area.
• All ignition sources, such as smoking, must be kept out of the spray area.
• Always maintain a readily available, approved fire extinguisher or other approved fire
fighting equipment in the spray area.
• Always locate turbine unit/compressor as far away from spray area as the air
supply hoses allow.
• Never use solvents containing Methylene Chloride, Trichloromethane or
other halogenated solvents for any reason to avoid a possible violent,
explosive chemical reaction when exposed to aluminum or zinc (refer to the
manufacturer’s MSDS or contact material supplier if there is any doubt to
confirm compatibility).
WARNING
To reduce the risks associated with hazardous Pressure:
• 2-Quart Cup must not exceed 50 psi.
• The 2-Quart Cup comes with a factory installed relief valve. Do not attempt to
replace relief valve with a plug. Pull on relief valve ring to insure that it is working
properly. Replace a faulty relief valve immediately.
• Before opening pressurized containers, disconnect all supply air and relieve
pressure by opening relief valve or screw.
CAUTION
To reduce the risks associated with lifting and handling:
• Always follow proper lifting and handling practices when moving system
components.
To reduce the risks associated with hazardous air pressure:
• Maintain spray equipment per 3M care and cleaning instructions in the applicable
owner's manual.
• Ensure air input pressure and all applicator system regulators are properly
adjusted prior to each use.
• Always follow required air pressure relief procedures for relieving air pressure
from the unit.
To reduce the risks associated with environmental contamination:
• Spray materials, solvents, other cleaning materials and electronic components
must be disposed of per federal, state and local regulations.
