6
3.4
3M
™
2181-LS Cable Addition Kit Contents:
a) adapter with gasket ........................ 1
b) sealing washer trees ....................... 8 ea
c) plugs .............................................. 4 ea
d) cable ties, blue and green .............. 4 ea
e) sheath scuff .................................... 1
f) 3M
™
2172 strength member clamps
w/ rubber boot and hose clamp ..... 4 ea
g) 3M
™
130C tape .............................. 1 roll
h) silicone grease (5 cc tube) ............. 2 ea
i) small allen wrench ......................... 1
j) bolts ............................................... 10 ea
b
c
d
h
g
f
e
3.5
3M
™
2178-LS Gasket Kit Contents:
a) gasket ............................................. 1
b) 130C tape ...................................... 1 roll
c) silicone grease (5 cc tube) ............. 2 ea
3M
™
2178-S, 2178-LS, 2178-LL Fiber Optic Splice Case Instructions
Note:
If wall mount bracket is required for the 2178-S
Splice Case or the 2178-LS Splice Case, use the
3M
™
2198 Mounting Bracket Kit. Attach
brackets to base (as shown) prior to cable
preparation.
Torque bolts to 25 in-lbs
±
5 in-lbs
(2.8 N
•
m
±
0.6 N
•
m).
3.6
Additional Materials Required:
•
Cable Cleaner
•
#6 AWG Ground Wire or equivalent
•
Splice Tray / Organizer
•
3M
™
Scotchlok
™
4460 D/FO Shield
Bond Connector, if using shielded
cables
•
Cable Splicer Knife
•
Tape Measure
•
Wire Cutter for Steel Strength Members
•
Electrician's Scissors
•
Screwdriver
3.7
Tools Required:
•
3/8" (10 mm) Hex Driver
•
1/2" (13 mm) Hex Driver
•
7/16" (12 mm) Hex Driver
•
Side Cutting Pliers
•
Needle Nose Pliers
•
Cable Stripper
b
a
a
i
j
c
