12
3M
™
Scotchlok
™
4460-D/FO Shield Bond Connector:
Attach each cable to closure base by installing a hose
clamp around the cable and under the cable tie down
bracket and tighten clamp.
7.2
Attach cables to closure base, using one of the two
methods below:
3M
™
2172 Strength Member Clamp:
Attach each cable to the closure base by installing a hose
clamp through the slot on the strength member clamp,
then around the cable tie down bracket, and tighten the
clamp.
7.3
Install one green cable tie on the "Feeder Cable" and
trim. Install one blue cable tie on each "Distribution
Cable" and trim.
Note:
Cable ties may also be placed inside case per
company standard practice.
cable tie
down bracket
